|
|
|
SSP 200 Fast Set Concrete Crack and Spall Repair |
Sets in just 15 minutes!
SSP-200 is an extremely low viscocity polymer about the viscosity of water. It penetrates deep into the capillaries of concrete creating thousands of micro-anchor points when it hardens, effectively mending concrete failures.
SSP-200 is a two component, 1:1 ratio, polymer that is hand-mixed and applied directly to concrete.
SSP-200 is an extremely low viscocity polymer about the viscosity of water. It penetrates deep into the capillaries of concrete creating thousands of micro-anchor points when it hardens, effectively mending concrete failures.
SSP-200 is a two component, 1:1 ratio, polymer that is hand-mixed and applied directly to concrete.
|
Typical Applications of SSP-200:
|
SSP-500 is slightly higher viscocity urethane polymer while still providing deep penetration value. It is denser than SSP-200 and has slightly more "body", making it well suited for smaller cracks, bolt holes, and other "neat" applications. SSP-500 has significantly higher resistance to impact than lower viscosity materials.
The main feature of SSP-500 is that it is 100% ODOR FREE!!!....during mixing, application, and even grinding!
The main feature of SSP-500 is that it is 100% ODOR FREE!!!....during mixing, application, and even grinding!
|
Typical Applications of SSP-500:
|
Repair Damage and Defects in New Slabs
|
|
General Characteristics & Benefits of SSP 200/500 Concrete Repair Material
- FAST & SIMPLE SURFACE PREPARATION REQUIREMENTS
- VERY HIGH IMPACT RESISTANCE
- WITHSTANDS HEAVY FLOOR GRINDING
- APPLIED IN VERY COLD APPLICATIONS
- HIGH STRENGTH BOND IN MINUTES
- FLEXIBLE - NOT BRITTLE LIKE EPOXY
- CAN BE FEATHER - EDGED
- SAVES MAN HOURS & DOWN-TIME
- LONG TERM DURABILITY
- MEETS USDA REQUIREMENTS
- PROVIDES SMOOTH & DURABLE SURFACE FOR FORK LIFTS
Finishing:Finishing the SSP 200/500 repair flush using a planatary or small hand grinder.
The repair mends the crack or spall together with no cold joint between the SSP and the concrete slab. Only repair may be noticeable because of a slight discoloration. Near exact color matching is achievable using Cam-O-Patch colorants or unhanded colored grout powder available locally. |
|
Repair Cracks and Cold Joints Prior to Epoxy Coatings
|
|
SSP-200 was used to repair extensive cracks throughout this Volvo dealership maintenance shop prior to installing a 20 mil epoxy floor coating. Note that cracks do not telegraph thru the epoxy coating.
|
SSP-500 Patch repair
|