SOLID SOLUTIONS PRODUCTS, INC.

Solid Solution Products, Inc.  844 439-7687    17842 Sampson Lane  Huntington Beach CA 92647     info@ssppolymers.com

©2016-18 ALL RIGHTS RESERVED

SSP 200/500 FAST SET CONCRETE CRACK & SPALL REPAIR

                                    SETS IN JUST 15 MINUTES!

SSP-200 is an extremely low viscocity polymer about the viscosity of water. It penetrates deep into the capillaries of concrete creating thousands of micro-anchor points when it hardens, effectively mending concrete failures. SSP-200 is a two component, 1:1 ratio, polymer that is hand-mixed and applied directly to concrete.

     Typical Applications of SSP-500:

                                   

SSP-500  is slightly higher viscocity urethane polymer while still providing deep penetration value.  It is denser than SSP-200 and has slightly more "body", making it well suited for smaller cracks, bolt holes, and other "neat" applications.  SSP-500 has significantly higher resistance to impact than lower viscosity materials. The main feature of SSP-500 is that it is 100% ODOR FREE!!!....during mixing, application, and even grinding!

  Repair Damage and Defects in New Slabs:

General Characteristics & Benefits of SSP

200/500 Concrete Repair Material

    FAST & SIMPLE SURFACE PREPARATION REQUIREMENTS

    VERY HIGH IMPACT RESISTANCE

    WITHSTANDS HEAVY FLOOR GRINDING

    APPLIED IN VERY COLD APPLICATIONS

    HIGH STRENGTH BOND IN MINUTES

    FLEXIBLE - NOT BRITTLE LIKE EPOXY

    CAN BE FEATHER - EDGED

    SAVES MAN HOURS & DOWN-TIME

    LONG TERM DURABILITY

    MEETS USDA REQUIREMENTS

    PROVIDES SMOOTH & DURABLE SURFACE FOR FORK LIFTS

Finishing

Finishing the SSP 200/500 repair flush using a planatary or small

hand grinder.

The repair mends the crack or spall together with no cold joint

between the SSP and the concrete slab.

Only repair may be noticeable because of a slight discoloration. 

Near exact color matching is achievable using Cam-O-Patch

colorants or unhanded colored grout powder available locally..

Repair Cracks and Cold Joints Prior to Epoxy Coatings

..

SSP-200 was used to repair extensive cracks throughout this Volvo dealership maintenance shop prior to

installing a 20 mil epoxy floor coating.  Note that cracks do not telegraph thru the epoxy coating.

SSP-500 Patch Repair

     Typical Applications of SSP-200:

CRACK REPAIRS

REBUILDING CONTROL JOINT EDGES

SPALLS / POP-OUTS

GRADE MATCHING

MENDING BROKEN SLABS

RE-BONDING DELAMINATED FLOOR COATINGS

FREEZER THRESHOLD REPAIRS.

SMALL CRACK REPAIRS

REBUILDING CONTROL JOINT EDGES

SPALLS / POP-OUTS

FLASHING SHALLOW SURFACES

PIT GROUT

ANYWHERE ODORS ARE AN ISSUE!.

SSP 200 FAST SET CONCRETE CRACK & SPALL REPAIR